-
- Tổng tiền thanh toán:
Bộ đổi nguồn 220VAC sang 12VDC 66A
Khi mua hàng tại website của chúng tôi, quý khách sẽ được:
Bộ đổi nguồn 220VAC sang 12VDC 66A Leyu S-800-12
Features
SPECIFICATIONS |
||||||
OUTPUT |
||||||
MODEL |
S-800-12 |
S-800-13.5 |
S-800-15 |
S-800-24 |
S-800-27 | S-800-48 |
DC Voltage |
12V |
13.5V |
15V |
24V |
27V | 48V |
Rated Current |
66.5A |
59.2A |
53A |
33A |
29.6A | 16.6A |
Current Range |
0-66.5A |
0-59.2A |
0-53A |
0-33A |
0-29.6A | 0-16.6A |
Rated Power |
798W |
799W |
795W |
792W |
799W | 796W |
Ripple & Noise |
240mVp-p |
240mVp-p | 240mVp-p |
240mVp-p |
200mVp-p | 300mVp-p |
Voltage Adj. Range |
10-13.2V |
12-15V | 13.5-18V | 20-26.4V | 24-30V | 41-56V |
Voltage Tolerance |
±2% |
±2% |
±1% |
±1% |
±1% | ±1% |
Setup,Rise,Hold Up Time |
1.5s, 50ms, 20ms at full load |
|||||
INPUT |
||||||
Voltage Range |
180~264VAC 47~63Hz |
|||||
AC Current |
3.5A/230V |
|||||
Efficiency |
84% |
84% |
83% |
85% |
86% | 87% |
Inrush Current |
18A/115V 36A/230V | |||||
Leakage Current |
< 3.5mA/240VAC |
|||||
PROTECTION |
||||||
Over Load |
105%~135% |
|||||
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
||||||
Over Voltage |
13.8-16.2V |
15.5-18.2V | 18-21V | 27.6-32.4V | 31-36.5V | 57.6-67.2V |
Over Temp |
≥55℃Fan On ≤45℃Fan Off ≥70℃ Output Cutout |
|||||
ENVIRONMENT |
||||||
Working Temp., Humidity |
-10℃~+50℃; 20%~90%RH |
|||||
Storage Temp., Humidity |
-20℃~+85℃; 10%~95%RH |
|||||
Vibration |
10~500Hz, 2G 10min,/11cycle, 60min, each axes |
|||||
SAFETY |
||||||
Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC I/P-FG:0.5KVAC |
|||||
Isolation Resistance |
I/P-O/P,I/P-FG,I/P-FG:500VDC/100MΩ |
|||||
STANDARD |
||||||
Safety Standard |
UL1950 |
|||||
EMC Standard |
CISPR22(EN 55022),IEC1000-4,2,3,4,5,6,8,11 IEC1000-3-2 |
|||||
OTHERS |
||||||
Dimension |
241*124*66mm (L*W*H) |
|||||
Weight |
1.3Kg |
|||||
NOTE |
||||||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |