Giới thiệu module I/O lập trình nhúng Wise (WISE I/O Module, Web inSite) hãng ICP DAS

About WISE

WISE is an Intelligent Web-based Multi-functions I/O module designed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive HMI interface that allows you to implement control logic on controllers just a few clicks away; no programming is required. With this powerful and easy-to-use software, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.

System Architecture

Through Web browser, you can access Web Server on WISE I/O module to perform tasks such as logic rule edition and download. WISE equips an IF-THEN-ELSE rule engine that will check whether the rules are valid or not and determine the execution of actions under specific conditions, for examples: setting up I/O channel values, perform scheduled and Timer tasks, sending Email under a specific condition. In addition, through the Modbus TCP/RTU protocol, it enables SCADA software to control and monitor I/O channel or system status on controllers in real time.

In addition to merits inherited from the previous WISE I/O module series, WISE-580x even provides more supports in I/O functions. It allows to connect with a wide range of the XW-Board, I-7000 Remote I/O modules and Modbus RTU/TCP Slave modules; enables to freely choose the most suitable I/O modules. With the microSD card, it provides Data Logger function to real-time record the I/O data of the controller and allows to send the data files by FTP or Email at a scheduled time to the control center for further administration management or data analysis.

WISE Features

• IF-THEN-ELSE logic rules execution ability

WISE equips with an IF-THEN-ELSE logic Rule Engine; it offers IF-THEN-ELSE rules for you to set up the logic content. After completing rule edition and downloading rules to the WISE controller, the Rule Engine will loop execute the rules in order under specific conditions.

• No programming is required to implement logic content on controllers

WISE provides user-friendly Web UI pages for editing control logic on the controllers. It enables to implement logic edition by a few clicks on the mouse to set up and deploy logic rules without writing a single line of code.

• No extra software tool is required; all operations can be done through the Web browsers

Provides Web-based HMI interface runs on regular Web browsers. To edit control logic, it only requires a browser to connect to the Web server on WISE. No extra software tool installation is needed on the target PC.

• Support various I/O Modules

WISE-580x allows to connecting with a wide range of the ICP DAS I/O modules as XW-Board and I-7000 modules. In addition to these ICP DAS modules, WISE also allows to connect with devices that support Modbus RTU/TCP Slave protocol for I/O monitoring. The ability to connect with various types of I/O modules enables flexibility and scalability for system implementation and allows to meet various requirements from the clients that enable to find best solutions to meet the requirements.

• Support various hardware modules that are with different I/O types

WISE-71xx / WISE-72xx / WISE-75xx / WISE-790x provides the wide range of I/O function modules and allows users to find best solutions that meet their requirements. Please refer to the following table for modules and functions:

Modules	Functions
WISE-71xx / WISE-72xx / WISE-75xx	Analog Input Modules
	Multi Function I/O
	Digital I/O
	Relay Output & Digital Input
WISE-790x	I/O Expansion Boards (X-Board)

• Data Logger function

With the microSD card, WISE-580x provides Data Logger function to real-time record the I/O data of the controller and sends the data files by FTP or Email to the control center for further administration management or data analysis.

• Provide Timer and Schedule operation

WISE features two kinds of timing functions: Timer and Schedule. It allows you to perform specific tasks such as time delay, or schedule specific date or time for control logic execution. To ensure the accuracy of the WISE controller clock, it also has the ability to sync the clock to an SNTP time server for time synchronization through the network.

WISE-580x / WISE-79xx / WISE-75xx	Features Timer and Schedule functions
WISE-71xx / WISE-72xx	Only features Timer function

• Provide Email message and CGI command sending functions

WISE supports non-SSL Email message and CGI command sending functions. Email and CGI command functions are important function for real-time message communication. The sending action can be added to the logic edition as part of logic control to provide real-time message transmission or sending CGI command for device control in response to specific events.

• Recipe function for Group Action operation

WISE provides Recipe function that allows to execute a sequence of actions previously saved in the Recipe to response to IF-THEN-ELSE logic rules Conditions. You can create different Recipe sets to meet various requirements for different applications.

• Real-time monitoring system status of I/O modules

WISE supports Modbus TCP/RTU Protocol (only WISE-5800 / WISE-5801 features Modbus RTU Slave function.) for users to perform real-time monitoring and control of the WISE I/O modules. WISE also provides an easy-to-view HMI web interface for real-time monitoring. It allows users to get important real time system information even without SCADA software.

• Password protection for access control

WISE HMI web page offers password protection. After getting in the webpage, you will be required to input the password before editing logic rules. 

• Active I/O Sending function

In addition to the Modbus TCP/RTU Slave function that enables SCADA software (or HMI device) to poll the I/O channels value of the WISE-580x, now WISE-580x provide the new function “Active I/O Sending” for user. Based on the “Active I/O Sending” function, WISE-580x can send the I/O channels value of the controller actively to SCADA software (or HMI device) by event trigger (I/O channel value changed) or periodic cycle. This function will improve the efficient of the data communication between WISE-580x and SCADA software (or HMI device).

Please note: The SCADA software (or HMI device) must equip the Modbus TCP Slave function to receive the I/O channels data sent by WISE-580x. 

• MQTT Message Publish/Subscribe operation

WISE-75xx supports the non-SSL MQTT protocol. It can publish the I/O channel data to the MQTT broker, and receive the message content of the Subscribe MQTT Topics which is published by others MQTT device to control the output channels.

• Provides SMS command receiving function and alarm notification function

WISE-5801(-MTCP) equips SMS command receiving and alarm message notification function. It allows to include SMS alarm sending action into logic rules to send a pre-set SMS message to related personnel when an event occurs. In addition, WISE allows to receive the SMS commands sending by specific phones numbers to perform tasks such as real-time channel monitoring, channel data modification and logic rules execution (triggered by SMS), etc.

• Fully P2P function between WISE controllers

WISE-71xx / WISE-72xx / WISE-75xx / WISE-790x offers P2P function that enables WISE controllers to directly communicate with other remote WISE controllers on networks. All WISE controllers can freely share their status information such as I/O channel value, DI/DO Counter or Internal Register to each others. The P2P operations can be incorporated into WISE logic rules as Condition statements or Action statements for Condition evaluation criteria or Action executions.

WISE-580x Series

More hardware and software specifications, you can find on Comparison List.

Model	I/O Module Supported			SMS
	Local	Remote
		RS-485	Ethernet
WISE-5800	XW-board	I-7000 module or Modbus RTU module	-	-
WISE-5801				Yes
WISE-5800-MTCP		-	Modbus TCP module	-
WISE-5801-MTCP				Yes

WISE-71xx / WISE-72xx / WISE-75xx / WISE-790x Series

More hardware and software specifications, you can find on Comparison List.

Model	DI Channel		DO Channel		AI Channel		AO Channel
	Ch.	Type	Ch.	Type	Ch.	Type	Ch.	Type
WISE-7102	6	Wet (Sink,Source)	3	Open Collector (Sink)	3	±150mV, ±500mV, ±1V, ±5V, ±10V, 0~20mA, ±20mA, 4~20mA	-	-
WISE-7105	-	-	4	Open Collector (Sink)	8	Thermistor	-	-
WISE-7115	-	-	-	-	7	RTD: Pt100, Pt1000, Ni120, Cu100, Cu1000	-	-
WISE-7117	-	-	4	Open Collector (Sink)	8	±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20mA	-	-
WISE-7118Z/S	-	-	6	Open Collector (Sink)	10	±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, ±20mA, 0~20mA, 4~20mA Thermocouple: J, K, T, E, R, S, B, N, C, L, M, LDIN43710	-	-
WISE-7118Z/S2
WISE-7126	2	Dry (Source), Wet (Sink,Source)	2	Open Collector	6	±500 mV, ±1V, ±5V, ±10V, 0~20mA, ±20mA, 4~20mA	2	0~5V, ±5V, 0~10V, ±10V, 0~20mA, 4~20mA
WISE-7142	-	-	16	Open Collector (Sink)	-	-	-	-
WISE-7144	8	Wet (Sink,Source)	8	Open Collector (Sink)	-	-	-	-
WISE-7150	12	Wet (Sink,Source)	6	Open Collector (Sink)	-	-	-	-
WISE-7151	16	Wet (Sink,Source)	-	-	-	-	-	-
WISE-7152	8	Wet (Sink,Source)	8	Open Collector (Source)	-	-	-	-
WISE-7153	16	Dry (Source)	-	-	-	-	-	-
WISE-7160	6	Wet (Sink,Source)	6	Power Relay Form A (SPST N.O.)	-	-	-	-
WISE-7167	-	-	8	Power Relay Form A (SPST N.O.)	-	-	-	-
WISE-7255	8	Dry (Source), Wet (Sink,Source)	8	Open Collectors (Source)	-	-	-	-
WISE-7504M	4	Dry (Source), Wet (Sink)	-	-	4	±500mV, ±1V, ±5V, ±10V, 0~20mA, ±20mA, 4~20mA	4	0~5V, ±5V, 0~10V, ±10V, 0~20mA, 4~20mA
WISE-7517M-10	-	-	-	-	10/20	±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20mA	-	-
WISE-7519ZM/S	-	-	3	Open Collector (Sink)	8	±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20mA Thermocouple: J, K, T, E, R, S, B, N, C, L, M, LDIN43710	-	-
WISE-7519ZM/S2
WISE-7526M	2	Dry (Source), Wet (Sink,Source)	2	Open Collector	6	±500 mV, ±1V, ±5V, ±10V, 0~20mA, ±20mA, 4~20mA	2	0~5V, ±5V, 0~10V, ±10V, 0~20mA, 4~20mA
WISE-7555M	8	Dry (Source), Wet (Sink,Source)	8	Open Collector (Source)	-	-	-	-
WISE-7560M	6	Wet (Sink,Source)	6	Power Relay Form A (SPST N.O.)	-	-	-	-
WISE-7901	Support ICP DAS X-Board DIO function : X107,X109,X110,X111 Multi function : X202,X203,X303,X304,X305,X308,X310,X324

Monitoring System for Ranch

In the environment of the ranch, due to the ranches generally consist of large areas, it is necessary to collect the sensor information from all over the ranch through wireless technology, and it also requires to remotely control the equipment located everywhere of the ranch, so that the operator can adjust the suitable environment parameters according to the factors such as weather, temperature and humidity to help the growth of the livestock and the crop.

WISE-5231M-4GE can work with the ZT-2550/ZT-2551 Zigbee wireless communication module to collect the temperature and humidity information throughout the ranch and detect rain through the rain detector. If the rainfall intensity is too high or rainfall is too much, it can be covered by the electric retractable curtain automatically or manually via the WISE5231M-4GE. WISE also supports LINE Notify message sending. It can be used with scheduled function to send messages to report the current status of the equipment and environment of the ranch, or to send the alarm notification message to the manager for immediate response when a special event occurs. Based on the function WISE-5231M-4GE provided, it can provide convenient and real-time management mechanisms for the manager of the ranch and reduce loading of the task.

Related Products
WISE-523x/WISE-224x	Intelligent IIoT Edge Controller
ZT-2550	RS-232/RS-485 to ZigBee Converter (ZigBee Coordinator)
ZT-2551	RS-232/RS-485 to ZigBee Converter (ZigBee Router)
DL-100TM485	IP66 Remote Temperature and Humidity Data Logger with LCD Display (RS-485)
M-7055	8-ch Isolated DI (Dry, Wet) and 8-ch Isolated DO (Source, PNP, 10~40 VDC) Module

Community Fire Alarm System

Hydrant equipment is an indispensable part of the Community/Home security system. Nowadays, most communities are equipped with the Hydrant equipment. However, most of the Hydrant equipment is old version and has no Internet connection function. If we can improve the functionality of the Internet connection for these Hydrant equipment, then the real-time information of the sensor and the status of the Hydrant equipment can be sent to the Internet Cloud system, the manager of the Hydrant system can receive the real-time alarm notification through the mobile phone at anytime and anywhere, and then also can control the operation of Hydrant equipment remotely to avoid or reduce the damage. It will increase the reliability of the Community/Home security system.

WISE-5231 supports the Modbus RTU protocol, which can be connected to the Central Control Host of the Fire Detector to get the real-time information, control the Hydrant equipment, and it can also work with a smoke detector to enhance the fire detection capability. The distributed WISE-5231 in different areas of the community can transmits the sensor data of Hydrant equipment to the IoTstar Cloud Management software for data collection and analysis. With the IoTstar Bot Service, when the fire is detected, the Bot Service will send the alarm notification message to the mobile phone of the duty officer by LINE App. The duty officer also can check via the LINE App to see if the on-site Hydrant equipment has been activated or not. If not, the Hydrant equipment can be activated through the LINE App in real time. It provides convenient and immediate community safety management mechanism. 

Related Products
WISE-523x/WISE-224x	Intelligent IIoT Edge Controller
IoTstar	Industrial IoT application software (For remote monitoring and management of the WISE/PMC/PMD controllers)
IoTstar Bot Service	Optional package for IoTstar; support LINE App

Tunnel Monitoring System

The security maintenance in a tunnel is a tough work and it is time sensitive. For it always requires to monitor a wide range of areas in the tunnel, if all monitoring jobs only rely on manual operations when a disaster happened, it might cause delays and lead to huge losses. WISE controller allows to connect to various I/O modules and is able to response to the emergency in real-time. In this case, the WISE controllers are installed in various segments in the tunnel and are connected to smoke/temperature sensors, warning lights, sprinklers, ventilation fans and other equipment. The logic rules that in response to emergency situations could be pre-set in WISE controllers, and when smoke and high temperature are detected, the fire fighting procedures will be triggered; the sprinklers will be automatically turned on to put out the fire; the ventilation fans will be started to take away the smoke; and will turn on the warning lights and open the security doors to guide people in the tunnel away from the emergency scene. The related information will be gathered in back-end control center, and will send out notification to all controllers in all segments of the tunnel for traffic control and management.

• Benefit

• WISE controller allows to connect with ICP DAS I-7000 modules and Modbus RTU modules; therefore enables to control various I/O devices at the same time. Via RS-485, WISE is able to connect to remote I/O modules all over the place; offering flexible deployment options for on-site wiring.
• WISE controller is equipped with IF-THEN-ELSE logic setting function. The logic Rules can be easily implemented via web page interface. And after the settings are completed, it allows to perform real-time monitoring for the on-site status and be able to immediately response to the emergency situations.
• Support Modbus TCP / RTU Protocol, enables to connect with SCADA software in control center for data aggregation.

Related Products
WISE-523x/WISE-224x	Intelligent IIoT Edge Controller

Greenhouse Automation Solution

Greenhouse cultivation represents a very important role in modern agriculture. As the greenhouse usually is equipped with various high-tech equipment, management tend to be very complex. A fully automated greenhouse control systems bring obvious benefit such as labor saving, but far more importantly, it enables improved quality of produce and information gathering that will make difference between earning a profit or suffering substantial losses.

WISE allows to connect to various I/O modules for thermocouple inputs that allow real-time monitoring of the temperature and humidity in the greenhouse; the DO module can be connected to various greenhouse facilities. It will real-time detect the greenhouse status and in response to sensors connected; the control system will automatically adjust vent position, fans, heating, fogging, shading, lighting, irrigation frequency, irrigation nutrient levels and CO2 levels, etc. WISE controller will tirelessly monitor the key environmental factors that affect crop quality and will make constant changes that a grower could not possibly achieve the same consistency level. In addition, WISE controller also support Modbus and IoT protocols so that information can be instantly transmitted to the control center and makes real time monitoring of the overall status for each greenhouse more efficiently.

• Benefit

• WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
• Support Modbus TCP Protocol that enables seamless integration with SCADA software.

Related Products
WISE-523x/WISE-224x	Intelligent IIoT Edge Controller
I-7016D	2-ch 4-wire Strain Gauge Input Module with LED Display
I-7018	8-ch Thermocouple Input Module
I-7050	7-ch Non-isolated DI (Dry) and 8-ch Non-isolated DO (Sink, NPN) Module

Disaster Prevention System

In factories, most facilities and devices involved are all subject to overheating damage. From improper site wiring, lightning strikes, to overrun motors, a wide variety of overheating issues threaten systems and peripherals constantly. To ensure the safety of personals/devices, eliminate unnecessary machine downtime and achieve maximum productivity, it is necessary to build an automated system that enables real-time monitoring and disaster prevention.

WISE controller provides a total solution for disaster prevention/monitoring system that will detect temperature for various devices in the factory in real time. It also enables communication between devices that will initiate immediately actions in response to emergencies. For example, in response to pre-set critical temperature threshold, the system will take actions such as auto-stop the devices, turn on the temperature reduction devices, and send alarm notification to the related personnel. WISE controller also support Modbus and IoT protocols so that information can be instantly transmitted to the control center and makes response to emergencies and real time monitoring of the overall factory operation more efficiently.

• Benefit

• WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
• Support Modbus TCP Protocol that enables seamless integration with SCADA software.
• WISE-7118Z features PoE (Power over Ethernet) that eliminates the requirement for the dedicated electrical outlets and reduces complicated wiring. With PoE switch, it enables the ability to send electrical power over Ethernet cables.
• WISE-7118Z is equipped with AI channels that allow individual inputs of voltage, current, or thermocouple, it also features 240V AC high-voltage protection.

Related Products
WISE-7118Z	Intelligent I/O Module with 10-ch Thermocouple Input and 6-ch DO

Unmanned Facility Room Monitoring System

As the advance in science and technology development, the power system and the network system have become essential parts of modern life. No matter in the buildings, factories, or even outdoors, there are always control rooms with devices installed for power and network management and control. Due to the control rooms are always filled with all kinds of expensive devices and usually under high loading operations; the monitoring of temperature and humidity, and power consumption management become important issues for the whole system.

WISE can be used for monitoring the unmanned facility room. WISE allows to connect to ICP DAS I/O modules and Modbus slave modules; therefore it is able to connect with thermometer, hygrometer, air conditioner, warning devices and power meters. Logic rules for daily regular maintenance in the control room can be set on WISE controller, such as:

• When the room temperature is getting too high and being detected, the air conditioning equipment will be turned on and a real-time alarm message will be sent to related personnel.
• Set up the rotation schedule for air conditioning devices to take turns operating to ensure the air conditioning devices won’t be damaged due to prolonged operation.
• If an air conditioning device is detected to be damaged, the back-up air conditioning will be turned on for redundant operation and a real-time alarm message will be sent to related personnel.

In addition, it allows to connect to WISE controller by SCADA software to perform the control, monitoring and collection of the I/O channel data of the facilities. And the power consumption of facilities in the control room can be statistically calculated in order to manage the electricity usage and cost as well.

• Benefit

• WISE is able to connect with ICP DAS I-7000 modules and Modbus RTU modules, it allows to control more I/O ports and supports a wide variety of I/O devices. One WISE controller is enough to complete the monitoring of all devices in the control room.
• WISE controller allows to set up logic rules for 24 hours control room maintenance and monitoring; provides immediate response to the emergency situation and saves manpower.
• The two-way SMS communication capability of WISE enables to send message automatically to the related personnel, furthermore, the related personnel could send message to the WISE to remotely set up the output value for a specific channel.

Related Products
WISE-523x/WISE-224x	Intelligent IIoT Edge Controller

Environment Management System

As the advance of civilization causing heavy industrial and commercial activities, there are growing concerns about environmental issues; among them, wastewater treatment is one of the most emphasized areas for it involves complicated process and considerable number of devices needed during operations. In order to achieve reliable, high-performance, efficient and cost-effective result, automation approaches are essential to wastewater treatment solutions.

ICP DAS WISE controllers features realtime monitoring and reliable Alarm notification function that is perfect for use in wastewater treatment applications. It takes only a few clicks to configure logic control that enables automation and optimization of wastewater treatment operations, such as: auto-detect the level of the sedimentation tank and response immediately based on the wastewater level. For example, when the wastewater level drops, the floodgate will be opened to load wastewater to desired level; and if the wastewater accumulates in the tank reaches a certain level, it will start the pumps to process treatment until the level decreases. In addition, WISE controller also allows sending Alarm notification message regarding current water level to the related personnel for immediately response.

• Benefit

• WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
• Support Modbus TCP Protocol that enables seamless integration with SCADA software.
• WISE controller is equipped with schedule function that enables automatically shut down equipment to save electricity during off-hours or at any scheduled time.
• WISE is equipped with reliable SMS function that allows real-time notifying related personals via SMS for immediate response.

Related Products
WISE-523x/WISE-224x	Intelligent IIoT Edge Controller

Production Line Management

Eliminating unnecessary machine downtime, ensuring maximum productivity and maint a ining appropriate stock are keys to successful product line management. WISE controller features flexible logic functions and is an easy-to-learn and easy-to-use tool for creat ing cutting edge applications that makes it easy to take full control of your product line management.
 

ICP DAS offers full-range I/O modules that works with WISE controller that enables to connect with product line devices in various applications. The logic engine on controllers make it possible to set up different automation process by just a few clicks, for example: by connecting conveyer to WISE controllers, it allows to hold the conveying of semi-finished product during the manufacturing process for further processing; measure productivities statistics, or notify the operators ready for next steps. In addition, WISE controller can also be set to detect and response immediately when an error occurs during the manufacturing process to avoid the waste of raw materials or equipment damage. WISE controller also support Modbus and IoT protocols so that information can be instantly transmitted to the control center and makes real time monitoring the overall production line status more efficiently.

• Benefit

• WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
• Support Modbus TCP Protocol that enables seamless integration with SCADA software.
• WISE controller is equipped with schedule function that enables automatically shut down equipment to save electricity during off-hours or at any scheduled time.

Related Products
WISE-7126	Intelligent I/O Module with 6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO
WISE-7142	Intelligent I/O Module with 16-ch DO

Parking Area Guiding System

As the numbers of vehicles increasing year by year, parking becomes a global issue especially in dense urban area. In addition to providing adequate number of parking spaces, it’s also crucial to optimize the use of parking spaces by guiding drivers quickly finding vacant spaces within a parking facility.

ICP DAS WISE controller, together with the I-7055 digital I/O modules distributed all over the parking facility, offer a total solution that is perfect for large-scale parking facilities. With help of sensors and lights installed on each space, the system will guide drivers directly to the vacant parking spaces signified by auto-lighting flashing light. In addition, with DI Counter function, it is capable of producing occupancy statistic, trend and flow rates, etc., for analyses and reports. WISE also support Modbus TCP; the I/O information received by on-site controllers will be transmitted to control center in no time, therefore, achieves real time monitoring and remote management for entire parking facility.

• Benefit

• WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
• Support Modbus TCP Protocol that enables seamless integration with SCADA software.
• WISE controller is equipped with schedule function that enables automatically shut down equipment to save electricity during off-hours or at any scheduled time.
• I-7000 Series I/O modules features distributed control, expandable and simple wiring; it is especially suitable for large-scale systems.

Related Products
WISE-523x/WISE-224x	Intelligent IIoT Edge Controller

Fire Alarm Linked System

When a fire burns out in a building, not only the people near the fire scene need to pay attention to the emergency situation but all people in the building should be notified with the latest update. With the advanced P2P function of WISE, a linked alarm system can be easily built. Put 6 WISE-7152 modules in six regions of this area, the DI channels of each WISE-7152 module are connected to temperature/smoke detectors and emergency switches, and the 6 DO channels will be connected with the 6 warning lights (each warning light for a region). When the WISE-7152 in F region detects fire, it will send out the warning via the advanced P2P function to share the information. All warning lights represent F region on the 6 WISE-7152 distributed in the 6 regions will be turned on to notify everyone in the building that a fire is happening in F region. By knowing the exact fire scene location will help to guide people the accurate direction to leave the fire scene. After the problem in F region being solved by related personnel, press the emergency switch to turn off the alarm, the alarm in all 6 WISE-7152 will be turn off at the same time.

In addition to the 6 WISE-7152 distributed in various regions, another WISE-7152 could be installed to monitor the network status of all 6 WISE-7152 modules. Through the sharing information ability of advanced P2P function, this WISE-7152 will communicate with the other 6 WISE-7152 modules regularly, and the light indicators of the 6 DO channels on this WISE-7152 will show the network status of the 6 WISE-7152 modules. The operator could easily verify the network status of each module in this fire alarm linked system by the indicator and could quickly find and fix the module with no response.

• Benefit

• WISE-71xx series features advanced P2P function, multiple WISE modules could share channel information via network in real-time and could response immediately.
• By using Ethernet as the communication network for the entire system and with the POE feature WISE supported allows to reduce wiring.
• Without the use of a complex SCADA system, it allows to show the operating status of the whole system by the indicators and easy to perform maintenance.

Related Products
WISE-7152	Intelligent I/O Module with 8-ch DI and 8-ch DO

Cleanroom Management System

Cleanroom personnel are an important source of cleanroom contamination. To ensure the cleanliness of the cleanroom, in addition to high standard quality hardware, it also requires a well-designed personnel access control system to guarantee full control of all access attempts. ICP DAS WISE controller is perfect for managing access control and enables remote monitoring and control of all access attempts to the cleanroom in real time.

ICP DAS WISE-7144 is equipped with 8 DI and 8DO providing integration with various devices for receiving or sending digital signals. The Logic Rule Engine on the WISE controller enables easy configuration for various management processes. For example, connect WISE-7144 with IP Camera for access control, it allows the IP Camera (via CGI Command sending) to real time record the images of the workers before opening the outer door to the clean zone. After the outer door is shut, the workers enter the clean zone and get in the air shower chamber. At this time, WISE-7144 is able to start the air shower; the built-in Timer function makes it easy to define the shower time interval. After the shower is done, the inner door will be opened for the workers to move from the clean zone to the cleanroom. At the same time, WISE-7144 also allows to connect to the positive-pressure sensor and the access control security system for monitoring all access attempts or space management. WISE-7144 also supports Modbus TCP interface so that the information can be instantly transmitted to the control center and makes real time monitoring of the overall status of the cleanroom more efficiently.

• Benefit

• WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
• Support Modbus TCP Protocol that enables seamless integration with SCADA software.
• WISE-7144 features PoE (Power over Ethernet) that eliminates the requirement for the dedicated electrical outlets and reduces complicated wiring. With PoE switch, it enables the ability to send electrical power over Ethernet cables.
• WISE-7144 controller is equipped with Timer function that enables the evaluation of timeout conditions, and allows to start or stop the Timer.
• WISE-7144 controller is equipped with CGI Command function, in response to certain events, it allows to sending CGI commands for enabling the CGI process executions on the remote controllers such as IP Camera.

Related Products
WISE-7144	Intelligent I/O Module with 8-ch DI and 8-ch DO